Hot Tub Disposal glossary
The terms you'll come across, explained in plain English.
- Armoured cable
- Electrical cable with a protective steel layer, used for buried outdoor supplies such as hot tub circuits.
- Cabinet
- The outer panels around the shell, made of timber, composite or plastic. Rotten or split cabinets are common on older tubs.
- Cover lifter
- A hinged frame fitted to the cabinet that helps lift and fold back the heavy foam cover. It is removed along with the tub.
- Cut-up removal
- Cutting a hot tub into sections on site with saws when it cannot leave the garden whole, then bagging and carrying out the pieces.
- Drain valve
- A tap near the base of the cabinet that lets water drain through a hose. Old valves often seize, so a submersible pump is used instead.
- Equipment pack
- The pumps, heater, circulation pump and control box housed under the cabinet. These are electrical waste and must be recycled under WEEE rules.
- Fixtures and fittings form
- A form in a property sale listing what is included, such as a hot tub, and what the seller will remove.
- Footwell
- The lowest part of the hot tub floor between the seats, where the last water collects and must be sponged or pumped out.
- Foul drain
- A drain connected to the sewer, which takes water to a sewage works. Hot tub water with sanitiser should go to a foul drain.
- Hard-shell hot tub
- A rigid hot tub with a moulded acrylic shell set in a cabinet, with built-in pumps, heater and controls. The most common type in UK gardens.
- Hardwired hot tub
- A hot tub connected permanently to its own circuit from the consumer unit, usually via an outdoor isolator. Disconnection should be done by a competent electrician.
- Isolator
- A switch, usually in a weatherproof box near the tub, that cuts power to a hardwired tub. Switching it off does not make the cable safe to cut.
- Isolator switch
- A switch near a hot tub that cuts off the electrical supply so it can be worked on safely.
- Plug-and-play hot tub
- A hot tub that runs from a standard 13 amp socket through an RCD-protected lead, rather than a dedicated hardwired circuit.
- RCD
- A residual current device that switches off a circuit quickly if it detects an earth fault, essential for outdoor electrical equipment.
- Shell
- The moulded acrylic or plastic tub that holds the water. Cracks, blisters and delamination in the shell are the most expensive faults to repair.
- Submersible pump
- A pump placed in the water to empty the tub quickly through a hose. It must be powered from an RCD-protected socket.
- Surface water drain
- A drain carrying rainwater, often discharging straight to rivers or soakaways. Hot tub water should not be emptied into one.
- Swim spa
- A long exercise pool, typically four to six metres, with jets creating a current to swim against. Removal usually needs breakdown on site or a crane lift.
Get a free hot tub disposal quote
Tell us what you need and we'll come back with a clear price.
Request a quote